How to operate a lawn mower correctly?
1.Wear long-sleeved shirts and trousers, do not wear loose clothes, wear safety helmet, goggles, it is better to wear ear muffs to avoid noise, wear non-slippery shoes, do not wear slippers or barefoot using the machine.
2.Do not operate for a long time in hot or cold climate, to have appropriate rest time.
3.People who are drunk, have a cold or ill, children and people who are not familiar with the correct operation method of lawnmower are not allowed to operate the lawnmower.
4.Refuel the engine after it has stopped running and cooled down.
5.Avoid overflowing oil when refueling. If it spills, wipe it clean.
6.The machine at least 1 meters away from the object can be started.
7.The lawn mower must be used outdoors in a well ventilated area.
8.Before each use must check whether the blade is sharp or wear, clutch screw is locked.
9.Because some machine motors are loud, it should be avoided to use them during rest time so as not to affect the rest of people nearby.
Matters to be checked before starting the weeder
1.Check whether the oil tank has holes and leaks oil.
2.Must be replaced into a sharp blade, without abnormal blade.
3.Make sure others are not in the danger zone before starting the engine.
4.When starting the engine, it is necessary to grasp the lever to avoid losing control due to vibration.
5.Make sure the blade is away from the ground and not in contact with other items before starting.
6.Be sure to use the parts provided by the original manufacturer, especially the blades.
7.Check whether the complete cover is locked.
Lawn mower operation process
First of all, the choice of operation path is more flexible, because the turning radius of the machine is small, there is no flexible line, because the turning radius of the machine is small, there is no dead Angle of walking. Generally, the forward speed of the lawn mower can choose the gear according to the terrain and the density of grass. When the ground surface is uneven and the grass density is high, the low gear is selected; otherwise, the higher gear is selected. During the operation, the handles of the two clutch tensioning wheels are always in the joint position, because during the operation, when the engine is running at high speed, it is easy to damage the machine to engage or separate the handle of the tensioning wheels. Therefore, the operator does not need to move the two handles in the process of mowing, and the operation process is relatively simple. The driver only needs to hold the handle to control the walking route of the lawn mower. During the operation, we should carefully observe the terrain in front of the operation at any time. In case of large pits and high hills, we should slow down and go around. Otherwise, the high-speed cutting knife will play up a lot of dust, which is adverse to the operator and the machine. This machine is only suitable for operation on slopes below 25 degrees. If the slope is too high, the lubricating oil cannot lubricate all the moving parts. Long-term operation will damage the engine. When the machine is working, the irrelevant personnel should be kept away from the lawn mower to avoid the small stones rolled up by the cutter to injure others. After the operation is completed, disconnect the two clutch handles, then, reduce the throttle, hang the neutral, stop walking, close the throttle, extinguish the engine, move the cutter pressure pulley to the walking position, start the engine again, under the operation of the driver, the lawn mower can walk home. 1. When using the lawnmower for the first time, you must read the operation and maintenance instruction manual carefully. 2. When mowing grass, you must wear strong shoes. You can't operate the lawnmower barefoot or wearing perforated sandals. 3. Before starting each time, check whether the installation screws of the blade and engine are tightened; Check whether the engine needs oil, but do not exceed the standard position; Check if you have enough gasoline. 4. Do not refuel indoors when the engine is running or still in a hot state. Do not smoke when adding gasoline. 5, before cutting grass to thoroughly check the lawn area, remove branches, stones, wires, wire and other debris; Pay attention to holes, tree stumps and other dangerous locations. 6. Do not adjust the height of the wheel when the engine is running. Be sure to stop the engine until the blade is completely stationary and adjust it on the horizontal plane. 7, different speed for different conditions of grass, the highest speed of the engine is suitable for tall and strong grass, the lowest speed is suitable for short and thin grass, to push away the lawn mower at a suitable speed. 8. When cutting the grass on the inclined surface, first of all, we should be familiar with the applicable slope of the lawnmower. Do not cut the grass on the inclined surface with too large a slope. 9. Stop immediately after touching sundries, remove the spark plug connection, thoroughly check whether the lawnmower is damaged and repaired. 10. When the lawnmower crosses a gravel sidewalk or driveway, be sure to turn off the engine and pass at a constant speed. 11. Check the blade before using the lawnmower, and replace the blade if it is found to be worn, bent or unbalanced. If you continue to use a worn-out blade, a cut will form near the blade, eventually causing part of the blade to break off and potentially injuring a person. 12. After the blade is sharpened, check whether it is still in balance. If the blade is unbalanced, it will cause too much vibration and affect the service life of the lawnmower. 14. Before testing the blade or anything else, ensure that the spark plug connection is disconnected to avoid accidents caused by inadvertential starting. 13, in the disease season, before and after mowing must be disinfected blade and chassis so as not to spread disease. 15, in order to extend the life of the bag, each time after cutting the grass must remove the weeds in the bag, and often check the bag; If it is found that the sewing thread of the bag is loose or damaged, it is necessary to repair or replace the new bag in time. 16. Store the mower in a dry environment after the mowing season. Before storage, it should be sent to the designated maintenance place for testing and maintenance or refer to the maintenance manual for maintenance. Disconnect the spark plug, thoroughly clean the inside of the chassis with the side mower, scrape the remaining weeds with a putty knife or thread, and then rinse with water. When flushing, it is best to seal the muffler and air filter to prevent water from entering.
