Everyone knows that the flip plow can achieve the same tillage depth, and the soil can be deep without turning over. It can break the bottom of the flip plow without destroying the soil tillage layer. It can also be used for compound operations. If you use the flip plow to plow the land, Low operating cost. But in order to prolong the service life of the flip plow, we can do the following:
1. After each shift is completed, the adhesives on the working surface of the flip plow body should be removed, kept clean, and prevented from rusting, so as to reduce the frictional resistance between the soil and the flip plow wall.
2. After the end of each shift, all loose bolts and nuts should be checked and tightened, and the countersunk nails on the surface of the flip plow body must not protrude or sink too much.
3. Regularly check the wear of the flip plowshare, flip plow wall and flip plow side plate. If it exceeds the specified range, repair or replace it in time to keep the sharpness of the flip plowshare, so that the flip plow can work under normal conditions and ensure the quality of work. Reduce energy consumption.
4. In the farming season, inject butter into the butter nozzles of the limited depth wheel (and the ground and ditch wheels) every shift.
