What are the methods of using the hydraulic two-way flip plow? In order to facilitate the correct use of the hydraulic two-way flip plow for the majority of farmers, and solve the difficulties of users in use, some practical adjustment experience has been summarized in the after-sales service for many years. Now the hydraulic flip plow and hydraulic flip Plough, hydraulic flip plow 1LF-435B hydraulic two-way flip plow as an example. Introduce some adjustment methods in the correct use of hydraulic two-way flip plow.
1 Correct suspension method. Before plowing, the 1LF-435B hydraulic two-way flip plow is a three-point suspension. The two-point lower lift arm is installed behind the two pull-down ears of the plow, and then the central pull rod is hung. Pay attention to adjust the center of the plow to the center of the tractor. The method is to adjust the two lifting arms to be symmetrical and equal in size to the inner side of the tractor tire, and then tighten the zipper nuts on both sides to prevent uneven ridges when the plough swings from side to side when plowing.
2 Adjust the central lever. Before adjusting, plow from the ground first, and when returning, adjust the tractor tires after walking in the furrow. If the front part is deep, the back part is shallow. On the contrary, loosen the central tie rod to make the rear part of the plough frame deep and shallow, and then tighten the central tie rod to keep the plough frame front and rear parallel.
