What is the speed adjustment method of the hydraulic flip plow

Vertical water increase adjustment. After the horizontal water level adjustment of the plough frame is completed, the plough frame shall be adjusted longitudinally and horizontally in the trial tillage. During the trial farming, observe whether the large frame (or diagonal beam) of the plow is level. If the front is high and the back is low, the large frame of the plow is difficult to enter the soil or the plough is too shallow, the upper tie rod should be shortened; otherwise, the upper tie rod should be extended. At this time, it should be noted that the vertical and horizontal adjustment is performed after the horizontal and horizontal adjustment is completed, and the adjustment is only limited to the adjustment of the upper lever. If the length of the pull-down rod is adjusted to change, it will inevitably cause the horizontal and horizontal damage of the plough frame. At this time, even if the plow frame reaches a horizontal state in one farming state (such as right turning), it is difficult to ensure that the plow frame can be in a horizontal state in another farming state (left turning).