What should I pay attention to when deep ploughing? The deep ploughing depth is 25-35 cm, it does not plough painfully, does not produce new bottom layer, and achieves all-round deep loosening. It has good quality and long life. The deep tillage plough is made of special materials and technology; the deep tiller must be placed in the neutral position when the deep tiller is working. After use, the output rotates and turns the ground, and it must be slowly lowered to the required depth. The rear crawler gearbox works, it is best to work in one gear (the depth is greater than 1 meter), if the depth is less than 1 meter, you can choose to work in 2 or 3 gears.
It is strictly forbidden to use the self-walking gear when the deep tiller is working, because the self-walking gear speed is too fast to meet the speed requirement of turning the ground, and the crawling gear speed is .8-1 meters per minute to achieve the ideal speed for trenching, so and The speed of its own gear crawling gear is different and must be used alone. If it is used, it will cause serious gear damage and fail to work normally.
