Now is the critical period of autumn planting. Many farmers and friends are using wheat planters to work in the fields. However, wheat planters often fail. As for the faults of wheat planters, how to eliminate them? We can continue to look down!
Wheat Planter Troubleshooting Method
1. The seed meter does not meter The main reason is that the transmission gear is not meshed, or the square hole of the seeding gear of the seeding shaft head is worn, adjust, repair or replace.
2. Individual seed metering devices do not work The reason is that the seed shelf or the mouth of the seed metering device in the individual seed metering box is blocked by debris, and the cleaning and seeds should be replaced; the connecting pin of the seed metering shaft and the individual seed metering groove wheel is broken, and the pin should be replaced; the individual seed metering box should be replaced. The insert plate is not pulled open, and the insert plate should be pulled out.
3. Seed metering device discharges seeds, but there are no seeds in individual seed grooves The reason is that the opener or seed pipe is blocked (mostly occurs on the opener on the ground wheel), the blockage should be cleared, and corresponding measures should be taken to prevent debris from falling into the opener.
4. Seeding keeps on, out of control The reason is that the separation pin of the clutch strut falls off or the separation gap is too small. The pin should be re-installed and locked, or the separation gap should be adjusted.
5. The seeding is intermittent and the sowing is uneven The reason is that the meshing clearance of the transmission gear is too large, the gear slips, and it should be adjusted; the spring force of the clutch is too weak, the gear should slip, and the spring should be adjusted or replaced.
