1. Clean the appearance of the machine, including agricultural machinery and tools.
2. Put the machine in a ventilated and dry place.
3. Discharge all the cooling water in the water pipe and water tank.
4, start the machine to run for about 20 seconds, in order to volatilize the residual water in the body.
5. Shake the crankshaft and place the machine at the beginning position of the compression stroke (at this time, the inlet and exhaust doors are closed, and the roller of the high-pressure oil pump is not tightly pressed by the camshaft CAM). Keep this position unchanged and wrap the inlet and exhaust pipe mouth to prevent falling into bugs and other impurities.
6, on the appearance of agricultural machinery and machinery easy to rust parts, should be coated with a layer of fresh oil.
7. Every two months or so, untie the wrapping of the inlet and outlet pipe, start the machine and run for more than ten seconds (without adding cooling water), then place the machine in the original parking position, and re-wrap the inlet and outlet pipe. Such maintenance, when the machine can work, rust death phenomenon will not happen.
The threshing machine, pumping machine, pulverizer and other machines to clean up its appearance, and rust in the rust parts coated with antirust oil, and then the inlet and outlet cover, to prevent hard objects into the inside. For the pump, the water in the pump shell should also be discharged clean.
