How does the harvester harvest the lying wheat
1. When the harvester is equipped with a holding device, the lying stalk will be lifted and straightened. Serious lodging can be manual straightening and binding after the machine.
2, the harvester as far as possible straight line drive, in case of help to crush more wheat plants.
3. The harvester should be installed with the divider to ensure that the harvesting platform is effectively harvested, so as to avoid some spikes scattered on the ground after cutting.
4, wheat lodging serious, to try to make the stubble height less than 10 cm.
5, reduce the speed of mechanical forward, strive to operate accurately, and appropriately increase the air volume, adjust the wind direction and the opening of the sieve.
6. When harvesting the lying wheat, the position of the potting wheel should be adjusted forward and downward, so that the spring teeth are as close to the ground as possible in the position, so as to grab the straw, but can not touch the ground.
7, according to the lodging situation, adjust the rotary rotary teeth backwards 15 or 30 degrees, in order to grab crops from the ground and into the harvesting platform, should be unloaded at the same time the rotary rotary plate.
8, for lateral lodging, need to dial the wheel can be lowered properly, in lodging direction on the other side of the beginning of the harvest, in order to ensure wheat separation thoroughly, feeding smoothly.
9, harvest the longitudinal lodging of wheat, reversible lodging direction of harvest, and will dial the wheel plate teeth to adjust backwards tilt 15 to 30 degrees, so that the dial wheel lowered and forward.
10, lodging serious, reverse lodging direction to harvest empty car return; If lodging is not severe, harvest can be two-way.
Harvester adjustment precautions
1. Adjust the operation parameters timely and appropriately according to the lodging situation, especially the machine forward speed, cutting table parameters, threshing parameters, etc.
2. Try to avoid working in the early morning or at night when crops return to the tide. Under such conditions, the machine load is large and the crops are difficult to separate, which is easy to cause blockage of the cutting table and threshing system, damage to the machine and increase the harvest loss.
3 lodging serious, as far as possible according to the lodging direction of the harvest, so that the dial wheel in front of the cutter to help the crop, reduce cutting losses.
4. Harvest the lying wheat field must be dry straw dry, adjust the wind direction and the opening of the sieve, to bran is not wrapped in grain is appropriate.
5. Please read the manual of harvester carefully and adjust it according to the instructions.
