1. Structural components of wood grabber
The biggest difference between the wood grabber and the ordinary excavator is the difference in the front end of the work device, that is, the work is different: the big arm of the ordinary excavator is generally short, the front end is the bucket, its main role is to excavate and load operations; The big forearm of the wood grasping machine, commonly known as the "grasping arm", is generally long, and the shape and structure are different from ordinary excavators. The front end of the wood grabber is the main role of wood, wood, reed, straw and various strip materials loading and unloading and handling operations.
2. Original wood grabber
The original wood grabber refers to the new machine when it leaves the factory is a complete wood grasping machine, that is to say, the machine manufacturer is designed and produced according to the use requirements and standards of the wood grasping machine from the beginning until it leaves the factory. The original wood grasping machine is now priced at about 200,000, this machine is efficient and safe, and has become the favored product of the wood factory, which has replaced the forklift type wood grasping machine in the market.
3 Modify the wood grabber
Modified wood grabber, as the name implies, is modified into a wood grasping machine, generally used for digging purposes and transformed into an ordinary excavator, and usually modified by second-hand excavator, because no one will buy a new ordinary excavator to modify the wood grasping machine, to buy a new is better than to buy the original wood grasping machine. Therefore, it is more suitable to refit the wood grasping machine with a second-hand excavator, so that the investment cost can be greatly reduced.
The following is a brief description of how to convert an ordinary excavator into a wood grabber.
Because the original work purpose of the wood grabber and the ordinary excavator is completely different, so the front-end work device of the excavator must be replaced. The first is to replace the original standard short arm with a long arm (that is, the grasping arm), because the length and shape of the original standard arm is generally not suitable for remote grasping material and lifting high loading material work, but according to the actual situation, if you can meet the requirements of the working condition, you can also not replace the original standard arm. In addition, the original bucket is replaced with a wood catcher (claw), otherwise the bucket can not complete the grasping and loading operation.
